Soil Engineering and Foundation ›› 2026, Vol. 40 ›› Issue (4): 752-756.

Previous Articles     Next Articles

Experimental Study on Roadbed Filling of Expressway in Permafrost Area

ZHU Zhaorong1, HAN Kan1, ZHAO Shouquan1, WU Honggang1, TIAN Kai2, CHU Hongmei1   

  1. (1.China Northwest Research Institute Co. Ltd. of CREC, Lanzhou 730000;
    2.China Railway 17th Bureau Group Fifth Engineering Co. Ltd., Taiyuan 030000)
  • Received:2024-08-01 Revised:2024-08-08 Online:2026-08-30 Published:2026-08-26

Abstract: Expressway subgrades constructed in permafrost regions are highly susceptible to deformation and distress under repeated freeze-thaw cycling, particularly in environments characterized by severe climate and poor engineering-geological conditions. To address the subgrade problems observed along the permafrost sections of the Gongyu Expressway during operation, this study investigates crushed-rock ventilated subgrade gravel and stone-slag cushion materials through a combination of field surveys and laboratory testing. The mechanical behavior, soluble-salt content, capillary rise characteristics, permeability, and frost-heave response of the materials were systematically evaluated. The results indicate that the crushed-rock ventilated subgrade fill exhibits favorable gradation that complies with design specifications for permafrost regions. The soluble-salt content (0.057%~0.080%) exerts negligible influence on soil structure and frost-heave potential. The measured capillary rise height (26.0~29.0 cm) and strong capillary rise height (9.9~12.1 cm) both satisfy the performance requirements for permafrost-region subgrades. However, material saturation significantly reduces subgrade stability and may induce multiple forms of distress. These findings provide a scientific basis for evaluating and improving the long-term stability of expressway subgrades in permafrost environments and offer technical support for the maintenance and safe operation of the Gongyu Expressway.

Key words: Permafrost Regions, Expressway, Subgrade Fill Materials, Experimental Investigations

CLC Number: