›› 2016, Vol. 30 ›› Issue (4): 431-434.

• 工程实录 • 上一篇    下一篇

基于slide软件的边坡安全分析

吴发根1,高 爽2   

  1. (1.深圳市勘察测绘院有限公司,广东深圳 518027;2.广东科磊建设工程有限公司,广东东莞 523112)
  • 收稿日期:2015-08-24 出版日期:2016-08-20 发布日期:2016-08-26
  • 作者简介:吴发根(1987-),男,硕士,工程师,研究方向为岩土工程支护研究与实践。

Slope Stability Analysis Using SLIDE Software

WU Fagen1, GAO Shuang2   

  1. (1.Shenzhen Geotechnical Investigation & Surveying Institute Co., Ltd.,Shenzhen 518027;2.Guangdong Kelei Construction Engineering Co., Ltd.,Dongguan 523112)
  • Received:2015-08-24 Online:2016-08-20 Published:2016-08-26

摘要: 针对东莞某已失稳边坡,采用加拿大Rocscience公司开发的slide软件进行分析计算的基础上,结合理正软件,得出了山体边坡在自然状态下稳定系数约为1.1,处于临界失稳状态。并提出了有针对性的失稳边坡加固治理方案。

关键词: 失稳边坡, slide软件, 边坡加固, 东莞

Abstract: This paper presents a case history of the analysis and the design of a failed slope in Dongguan. The software SLIDE by Rocscience of Canada was used and the slope mitigation measures were proposed based on the analytical results.

Key words: Failed Slope, SLIDE Software, Slope Stabilization, Dongguan