土工基础 ›› 2021, Vol. 35 ›› Issue (4): 514-517.

• 测试技术 • 上一篇    下一篇

CFG桩复合地基承载力检测分析

程勋超1,傅志斌2   

  1. (1.桂林理工大学土木与建筑工程学院,广西桂林 541004;2.建设综合勘察研究设计院有限公司,北京 100000)
  • 收稿日期:2020-06-01 修回日期:2020-06-08 出版日期:2021-08-31 发布日期:2021-08-20
  • 作者简介:程勋超(1994-),男,硕士研究生,研究方向为岩土工程勘察和地基处理施工。

Bearing Capacity Testing on CFG Column Composite Ground

CHENG Xunchao1, FU Zhibin2   

  1. (1.College of Civil and Architecture Engineering, Guilin University of Technology, Guilin 541004;
    2.China Institute of Geotechnical Investigation and Surveying Co. Ltd., Beijing 100000)
  • Received:2020-06-01 Revised:2020-06-08 Online:2021-08-31 Published:2021-08-20

摘要: 结合张家口桥东区尚东万和工程实例,介绍了CFG复合地基承载力的桥测与分析过程,CFG桩分为两步检测,第一步进行桩身完整性检测,第二步进行复合地基承载力检测,分别采用低应变检测仪试验、复合地基承载力静载试验和单桩竖向抗压静载试验,对检测过程和成果进行了分析总结,通过低应变波速曲线和Q~s曲线图分别判断桩身完整性、承载力范围内沉降量满足设计要求。按规范要求和现场检验情况二者结合,发现低应变检测技术尚须进一步改善提高。

关键词: GFG桩, 低应变, 静载试验

Abstract: This paper presents a case history of quality assurance and quality control testing of Cement-Fly Ash-Gravel (CFG) Column composite ground in Shangdong Wanhe Project and a soil improvement project in the eastern district of Zhangjiakou Bridge. The subsurface soil strata are introduced and the end bearing CFG column is located in the gravelly soil stratum. Then the low-strain integrity testing instrument equipment diagram, several frequently encountered integrity test results types, basic principles and the essential static loading test devices are introduced. The bearing capacity evaluation of the CFG columns in the Shangdong Wanhe No.7 Building is divided into two steps: the first step is the column integrity testing, the second step of is the static loading tests on the composite ground (including column and it surrounding soils) as well as on the single column. The testing results are evaluated. The column installation integrity as well as bearing capacity of the composite ground evaluated throughout the low-strain test results and load-settlement (Q~s) curve of static loading test results. The results are satisfactory. The results also indicate that the low-strain test technique is needed for the improvement.

Key words: GFG Columns, Low Strain Integrity Tests, Static Loading Tests

中图分类号: